iFixit - Answers With Device "Corsair Mouse"

Corsair Vengeance M65 Mouse: Loose/sliding right click cover piece.

Wed, 09 Oct 2024 01:15:53 -0700

As per Title the covering plastic cover the right click was on the losing side of a fall with the floor and now wobbles/slides. I have not yet attempted repairs.

I cannot pull it out or otherwise cause it to misclick with usual use, or directly lightly pulling it. I can wobble/slide it in all directions.

Item in Question - Corsair Vengeance M65 Ultra Wireless

Corsair Harpoon Wireless: Middle mouse button not working reliably

Sun, 12 May 2024 05:31:50 -0700

Sometimes works when clicking it and sometimes doesn't, not very reliable. Scroll still works though.

Corsair Harpoon Wireless: Corsair Harpoon Wireless No longer charging

Tue, 13 Feb 2024 01:03:42 -0700

Hi there, My Mouse ran out of battery. However I tried to charge it back up by connecting the cable to my pc per normal, but nothing is happening, no lights, no indication to say it’s charging, and no indication in the Corsair application either. Any suggestions?

⟐ Commented February 13, 2024 at 1:03 MST

Corsair Vengeance M65 Mouse: Help identifying connecting points for busted left click solder pads

Mon, 22 Nov 2021 20:53:35 -0700

So i tried to replace left click switch on my mouse and ended up completely busting all three solder pads for the switch. I need help identifying where i can alternatively solder wires to these switch’s three pins

⟐ Commented November 22, 2021 at 20:53 MST

Corsair Vengeance M65 Mouse: Need to replace middle mouse button. Not the wheel... the down-click

Wed, 21 Jul 2021 10:35:09 -0700

Looking for replacement parts for the center mouse button

Corsair Vengeance M65 Mouse: Corsair M65 scroll wheel pushed off-axis

Fri, 15 Jan 2021 13:27:36 -0700

My Corsair M65 mouse was in storage while I moved and it seems the scroll wheel got pushed in by something heavy. I've disassembled it and the right button side of the spindle seems to be bent off axis. This causes the scroll wheel to wobble back and forth, and also makes it get stuck sometimes when clicking MMB. I tried to bend it back as much as I could without removing the Wheel from the mouse, which did help the problem a bit and made it not get stuck clicking MMB as much, but it still wobbles and I'm wondering if there's anything else I can do to fix it?

I tried to find a replacement wheel online but I didn't see any parts listed.

Corsair Vengeance M65 Mouse: Reassembly problem with ground ring/power supply

Sat, 07 Nov 2020 18:23:42 -0700

So, in a gaming-induced outburst, I may have slightly slammed my mouse down on a hard table (no mousepad) - just the once. It immediately lost power as per the LED and after gutting it completely, we have the following album.

Picture 1 is the USB entry point. No discernible problem.
Picture 2 is the optical PCB (face down in the mouse but face up for clarity here) with the corresponding screw points
Picture 3 is the base of the mouse with all screw points visible (as best as I could get)
Picture 4 is a close-up of the grounding ring (which appeared to be "loose" when I opened it up, but I have no idea where it's originally meant to be. It fits exactly over each of the 3 screw positions highlighted in #2 and I tried putting it back together with the grounding ring underneath one of said screws but it still wasn't working. I also wasn't entirely sure if the copper wire barely visible was correctly placed but assumed as long as it was touching the ring, it was fine.

I’m far from an expert but given the instant power loss, would I be right in thinking it was because the grounding ring had become displaced?

Many thanks.

Corsair Vengeance M65 Mouse: Mouse is slow moving to the right, and to some degree, up

Wed, 26 Jun 2019 08:23:38 -0700

I noticed this starting to happen about 2-3 months ago. At first it wasn’t very noticeable, but the last couple of weeks it’s gotten so bad I can’t play games anymore. What happens is that very often, when you move the mouse to the right (or diagonally up to the right), it will go very slowly. It will “loosen up” if you move it rapidly, but right now it will get bad again within a minute. I also have a middle mouse click (wheel) that is close to non-responsive, not sure if it’s the same problem. I did remove part of the sleeving from the cable (why do they add a textile sleeving which will cause friction and look ugly within a few months?) and cut into the plastic of the cable, but did not cut through the metal shielding, so I don’t think that’s the problem. Anyway, the shop is sending me a new one (I don’t have to return the old one), so I’m wondering if this is a known problem (or that it’s because I’m a very good customer).

Corsair Vengeance M65 Mouse: Disconnected / buggy mouse during fast

Thu, 25 Jan 2018 19:51:22 -0700

When I bought a mouse, everything was fine, one day the wire was torn during a game in cs go. At that moment, for 10 minutes my mouse went off 13 times.

Surrendered to repair, made a mouse, But. When surfing the Internet - everything is fine, but in games, when you quickly move it - it turns off, does not move, or does not fire

where can I get a wire for the corsair m65 and replace it?

Corsair Vengeance M65 Mouse: small weight's screw won't turn

Sat, 21 Mar 2015 07:06:30 -0700

As in the title, one of my screws won't turn, and I don't really know what to do, I don't have lot of gear, I just have some screwdrivers.