Fix Your Stuff Community Store

Free shipping on orders over €65*

Genesis II CSS-315 Ignitor Replacement

What you need

  1. Genesis II CSS-315 Ignitor Replacement, Ignitor: step 1, image 1 of 2 Genesis II CSS-315 Ignitor Replacement, Ignitor: step 1, image 2 of 2

    • Be sure the grill is turned off before beginning this guide.

    • Remove all of the control knobs.

    • The amount of knobs may vary depending on the grill.

    Edit

  2. Genesis II CSS-315 Ignitor Replacement: step 2, image 1 of 2 Genesis II CSS-315 Ignitor Replacement: step 2, image 2 of 2

    • Remove the two 19 mm screws below the control knob panel using a Phillips #3 screwdriver.

    Edit

  3. Genesis II CSS-315 Ignitor Replacement: step 3, image 1 of 2 Genesis II CSS-315 Ignitor Replacement: step 3, image 2 of 2

    • Push up on the front panel, and pull it up above the grill.

    • Potential for device damage: The ignitor is connected to the front panel, so do not pull too hard.

    Edit

  4. Genesis II CSS-315 Ignitor Replacement: step 4, image 1 of 2 Genesis II CSS-315 Ignitor Replacement: step 4, image 2 of 2

    • Disconnect the cables from the ignitor.

    Edit

  6. Genesis II CSS-315 Ignitor Replacement: step 5, image 1 of 1

    • Pinch the two ends of the ignitor and remove the ignitor from the front panel.

    Edit

  7. Genesis II CSS-315 Ignitor Replacement: step 6, image 1 of 1

    • Have the new ignitor on hand, and make sure that the clips on the side are in good condition.

    • Ensure that the pins at the end are straight and not bent.

    Edit

  8. Genesis II CSS-315 Ignitor Replacement: step 7, image 1 of 3 Genesis II CSS-315 Ignitor Replacement: step 7, image 2 of 3 Genesis II CSS-315 Ignitor Replacement: step 7, image 3 of 3

    • Put the new ignitor into the socket.

    • Press down evenly until it is secure.

    Edit

  9. Genesis II CSS-315 Ignitor Replacement: step 8, image 1 of 1

    • Connect the white cables to the ignitor.

    Edit

  10. Genesis II CSS-315 Ignitor Replacement: step 9, image 1 of 2 Genesis II CSS-315 Ignitor Replacement: step 9, image 2 of 2

    • Make sure any and all cables are separated from the fire box (the bottom of the grill).

    • Slot the panel back on the grill and then push downward.

    • The fire box is the part of the grill that gets really hot, and this can damage the cables.

    Edit

  11. Genesis II CSS-315 Ignitor Replacement: step 10, image 1 of 1

    • Make sure the holes match and reinsert the screws from Step 2 using a Phillips #3 screwdriver.

    • If the holes do not match up, you may have to gently push or pull the front plastic panel.

    Edit

  12. Genesis II CSS-315 Ignitor Replacement: step 11, image 1 of 2 Genesis II CSS-315 Ignitor Replacement: step 11, image 2 of 2

    • Add the control knobs, and slot them into place.

    Edit
Finish Line

One other person completed this guide.

Author

with 2 other contributors

Carlos Castro Paguaga

Member since: 01/18/21

253 Reputation

1 Guide authored

Badges: 3

Team

York University, Team S1-G5, Woodhouse Spring 2021 Member of York University, Team S1-G5, Woodhouse Spring 2021

YORK-WOODHOUSE-S21S1G5

1 Member

2 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 13

Past 30 Days: 45

All Time: 1,027