Introduction
- unscrew Screw the security screws located under the rubber feet. The top ones are located to the sides of the stands use your plastic pick to remove it and unscrew it. (use a 0 or 00 philips head)
- Locate on the front of the display where the casing meetss the screen, On the corners carefully slide your plastic pick to unlock the screen
- use your 0 or 00 screw driver to unscrew all screws that are on the motherboard/circuit board (seperate them cause there's small security screws and medium security screws)
- use a a pair of tweezers to unlatch the cables and carefully remove the mother board
- Take the new screen and align the motherboard/circut board where it belongs, and replug, and screw the screws where they belong
- enjoy
-
-
unscrew the security screws located under the rubber feet. The top ones are located to the sides of the stands use your plastic pick to remove it and unscrew it. (use a 0 or 00 philips head)
-
Locate on the front of the display where the casing meetss the screen, On the corners carefully slide your plastic pick to unlock the screen
-
use your 0 or 00 screw driver to unscrew all screws that are on the motherboard/circuit board (seperate them cause there's small security screws and medium security screws)
-
use a a pair of tweezers to unlatch the cables and carefully remove the mother board Take the new screen and align the motherboard/circut board where it belongs, and replug, and screw the screws where they belong
-
enjoy
-
-
To reassemble your device, follow these instructions in reverse order.
