How to Sew a Cloth Seat Cushion Strap

Find the hole in the seat cushion.

Cut a piece of thread long enough to fit the hole.

Put the thread through the eye of the needle.

Tie a knot at the end of the thread.

Sandwich the strap in between the two pieces of fabric.

Push the needle from the inside of the cushion, around where the broken seam is.

Use a small stitch over the material.

Pull the needle until thread is taut.

Use a small stitch under the material.

Pull the needle until the thread is taut.

Continue the same alternating stitch pattern of over and under until the end of the hole.

Push the needle in through the end of the sewn hole.

Wrap the thread around the needle two times.

Tie off your thread with a knot.

Pull the knot tightly.

Push the needle through the side of the cushion.

Pull until taut and cut off the excess thread.

This will hide the excess thread.

Now, your seat cushion is fixed!