How to Unclog Epson Workforce 2760 Ink Heads

In the "Settings" menu, set the printer cartridges to "Replace ink cartridges."

Move the cartridge to the side.

Place a towel underneath.

Place the cleaning solution of 100 mL in a cup of hot boiling water, with the cap off to avoid air pressure that can damage the solution.

Pull 5 mL of the hot solution using the syringe.

Apply the solution to the black printer head first.

After applying the solution, wait one hour for the solution to break down the dried ink.

After one hour, repeat steps one through four on the other ink heads.

Move the ink slot back into place, and insert the new ink cartridges.

Under "Settings," finish replacing ink cartridges process.

Print a "test page" and if the results shown on image three appear, the printer heads are successfully unclogged.