Fix Your Stuff Community Store

Free shipping on orders over €65*

Razer Naga V2 HyperSpeed Left/Right Switches Replacement

Introduction

In this guide, we will show you how to safely replace the left/right switches in your Razer Naga V2 Hyperspeed Wireless Mouse.

The left/right switches are the primary buttons, which are programmed by default to perform mouse actions. These are the main buttons for selecting and interacting with elements on a computer.

Common Cause

  • Corrupted Drivers
  • Low Battery
  • Physical Debris
  • Internal Hardware Failure

This guide will walk you through each step of fixing your left and right switches with each step of this replacement process. Please be careful and ensure you are patient with this process to avoid any damage to your device.

What you need

  1. Razer Naga V2 HyperSpeed Left/Right Switches Replacement, Left/Right Switches: step 1, image 1 of 3 Razer Naga V2 HyperSpeed Left/Right Switches Replacement, Left/Right Switches: step 1, image 2 of 3 Razer Naga V2 HyperSpeed Left/Right Switches Replacement, Left/Right Switches: step 1, image 3 of 3

    • Take off the magnetic top with the iFixit Opening tool and remove the dongle.

    Edit

  2. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 2, image 1 of 3 Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 2, image 2 of 3 Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 2, image 3 of 3

    • Heat the mouse feet with an iOpener or hairdryer.

    • Gently peel off the feet.

    • Reapply adhesive on the feet before installation if you're reusing them.

    Edit

  3. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 3, image 1 of 1

    • Use a T6 Torx screwdriver to remove the four 1.7 mm-long screws on the bottom of the mouse.

    Edit

  4. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 4, image 1 of 2 Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 4, image 2 of 2

    • Flip the mouse over and remove the top shell and side panel.

    Edit

  6. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 5, image 1 of 2 Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 5, image 2 of 2

    • Disconnect the battery compartment connector.

    Edit

  7. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 6, image 1 of 1

    • Disconnect the programmable button panel connector.

    Edit

  8. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 7, image 1 of 1

    • Disconnect the brown ribbon cable that's connected to the scroll wheel with precision tweezers.

    Edit

  9. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 8, image 1 of 2 Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 8, image 2 of 2

    • Use the iFixit Opening tool on the clip near the front of the mouse to release and remove the scroll wheel.

    Edit

  10. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 9, image 1 of 2 Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 9, image 2 of 2

    • Remove all six 1.7 mm-long Phillips #1 screws securing the motherboard and top left panel.

    Edit

  11. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 10, image 1 of 2 Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 10, image 2 of 2

    • Remove the top left black panel first using the precision tweezers.

    Edit

  12. Razer Naga V2 HyperSpeed Left/Right Switches Replacement: step 11, image 1 of 1

    • Remove the motherboard and remove the left/right click switches using the precision tweezers.

    Edit
Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 16

Past 30 Days: 84

All Time: 306