Fix Your Stuff Community Store

Free shipping on orders over €65*

Razer Naga V2 HyperSpeed Scroll Wheel Replacement

Introduction

In this guide, we will show you how to safely replace the scroll wheel in your Razer Naga V2 HyperSpeed Wireless Mouse.

The scroll wheel is a small wheel found in the top center of a computer mouse. It is used to scroll up and down through content on a screen or to click. Use this guide if your Razer mouse is experiencing issues involving inconsistent scrolling, not being able to scroll, random scrolling, malfunctioning buttons, or registering multiple clicks.

Common Causes

  • Wear and tear
  • Dust and Debris
  • Pin snaps
  • Electrical failure
  • Physical damage

This guide will walk you through each step of fixing your scroll wheel. Please be careful and ensure you are patient with this process to avoid any damage to your device.

What you need

  1. Razer Naga V2 HyperSpeed Scroll Wheel Replacement, Scroll Wheel: step 1, image 1 of 3 Razer Naga V2 HyperSpeed Scroll Wheel Replacement, Scroll Wheel: step 1, image 2 of 3 Razer Naga V2 HyperSpeed Scroll Wheel Replacement, Scroll Wheel: step 1, image 3 of 3

    • Take off the magnetic top and remove the dongle.

    Edit

  2. Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 2, image 1 of 3 Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 2, image 2 of 3 Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 2, image 3 of 3

    • Heat the mouse feet with an iOpener or hairdryer.

    • Use an opening tool or pick to remove the mouse feet.

    • Reapply adhesive to the feet before reinstallation if you're reusing them.

    Edit

  3. Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 3, image 1 of 1

    • Use a TR6 Torx screwdriver to remove the four screws on the underside of the mouse.

    Edit

  5. Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 4, image 1 of 2 Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 4, image 2 of 2

    • Flip the Razer mouse back over to the top side. Using the iFixit opening tool to slowly take the top shell off, and the right shell should fall off as well.

    Edit

  6. Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 5, image 1 of 2 Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 5, image 2 of 2

    • When taking the top shell off (middle shell), use precision tweezers to disconnect the battery compartment connector.

    Edit

  7. Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 6, image 1 of 1

    • Disconnect the Left shell and carefully remove the white connector with tweezers.

    Edit

  8. Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 7, image 1 of 1

    • Disconnect the brown ribbon cable that’s connected to the scroll wheel with precision tweezers (dull).

    Edit

  9. Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 8, image 1 of 2 Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 8, image 2 of 2

    • Use the iFixit Opening tool on the clip near the front of the mouse to release and remove the scroll wheel.

    Edit

  10. Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 9, image 1 of 2 Razer Naga V2 HyperSpeed Scroll Wheel Replacement: step 9, image 2 of 2

    • Widen the sides of the scroll wheel brackets that holds the scroll wheel using the iFixit Opening tool (you may need to use a little bit of force to widen the other side) and remove the scroll wheel.

    Edit
Conclusion

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 23

Past 30 Days: 104

All Time: 442