SPC GEAR GK630 Keyboard Switch Replacement

Step 1 Switch

Unplug cable from keyboard and remove all key caps.

Edit

Step 2

Unscrew all screws (there are no screws on the bottom of the keyboard), there should be 13 screws.

Edit

Step 3

After removing all the screws turn the keyboard upside down and the upper part should fell off, but hold it they are sill connected with black cable, unplug that cable.

Edit

Step 4

Using soldering iron touch its tip to the pin and when it melts press pump on it and push the button. Th pump should suck all the melted solder, if it failed try again